|
Related Questions |
View Answer |
|
Your Exchange Server 2007 environment has three Exchange servers that have the Mailbox
server role installed. The servers are configured to back up the existing Windows event logs and
mailbox databases. You add the Hub Transport server role to the Exchange servers. You want to
reconfigure the backups for the servers. Written company policy states that enough information
must be retained to perform a root cause analysis on lost or corrupted e-mail messages and to
recover as much data as possible in the event of a failure. You need to add backups for the Hub
Transport server role. What should you add to the current backups?
A. the TransportRolesLogs directory
B. the TransportRolesdataQueue directory
C. the Microsoft Information Store
D. the IIS metabase
|
View Answer
|
|
|
A users e-mail account is configured to use POP3. The users mailbox is accidentally purged from
the Exchange Server 2007 Mailbox server. You restore a backup copy of the database that
contained the mailbox to a recovery storage group on the same server. The user reports that he
can not access his mailbox. You need to ensure that the user can access his mailbox. Before you
reconnect the mailbox, what should you do?
A. Enable POP3 access on the mailbox.
B. Move the mailbox to a standard storage group.
C. Instruct the user to use IMAP to connect to the mailbox.
D. Instruct the user to use Outlook Web Access to connect to the mailbox.
|
View Answer
|
|
|
You install an Exchange Server 2007 Mailbox server. You want to create a full database backup
before you place users on the system. You take all databases offline so that they are consistent.
You initiate a backup by using the Microsoft Windows Backup utility. The backup immediately
fails, and you receive an error message. You need to complete a full backup of the databases.
What should you do?
A. Run the backup from the command line, with the /SNAP:ON switch.
B. Run the backup from the command line, with the /FU switch.
C. Shut down the information store, and restart the backup.
D. Mount all databases on the server, and restart the backup.
|
View Answer
|
|
|
An Exchange Server 2007 Hub Transport server named ExchHub1 fails. You build a new Hub
Transport server named ExchHub2 to replace ExchHub1.
After service is restored you want to recover all e-mail messages that remain in the mail.que
database on ExchHub1. You perform the following actions on ExchHub2.
Flush all messages from the existing queue on ExchHub2
Copy the mail.que database from the hard disk on ExchHub1 to C:
ecoveryQueue on ExchHub2.
You need to complete the recovery of the mail.que database from ExchHub1.
Which two actions should you perform on ExchHub2? (Each correct answer presents part of the
solution. Choose two.)
A. Using the Database Recovery Management tool, perform a repair of the mail.que database in
C:
ecoveryQueue.
B. Using the ISInteg utility, fix the mail.que database in C:
ecoveryQueue.
C. Using the Eseutil utility, perform a recovery of the mail.que database in C:
ecoveryQueue.
D. Using the Eseutil utility, perform a restore of the mail.que database in C:
ecoveryQueue.
E. Using the Eseutil utility, perform a defragmentation of the mail.que database in
C:
ecoveryQueue.
|
View Answer
|
|
|
You need to find out if users can log on to your Mailbox server directly by using Microsoft Office
Outlook. Which cmdlet should you run on the client network?
A. Test- ServiceHealth
B. Test- SystemHealth
C. Test- MAPIConnectivity
D. Test- OutlookWebServices
|
View Answer
|
|
|
The Mailbox server role and the Hub Transport server role reside on an Exchange Server 2007
computer named Exch1. You need to configure the server to retain the tracking logs for seven
days. What are two possible ways to achieve this goal? (Each correct answer presents a
complete solution. Choose two.)
A. Create a system policy to remove log files that are older than seven days.
B. Run the Set-TransportServer -Identity Exch1 -MessageTrackingLogMaxAge 07.00:00:00
cmdlet.
C. Run the Set-TransportServer -Identity Exch1 -MessageTrackingLogEnabled:$true cmdlet.
D. Run the Set-TransportConfig -Identity Exch1 -MaxDumpsterTime 07.00:00:00 cmdlet.
E. Run the Set-MailboxServer -Identity Exch1 -MessageTrackingLogMaxAge 07.00:00:00
cmdlet.
|
View Answer
|
|
|
Your Exchange Server 2007 environment contains a single Hub Transport server and a single
Mailbox server. E-mail delivery to large dynamic distribution group s is slow. All
MSExchangeADAccess Processes Performance Monitor counters on your Exchange servers
display normal results. You need to improve delivery time for messages that are sent to dynamic
distribution groups. What should you do?
A. Add more RAM to the existing Mailbox server.
B. Add more RAM to the existing domain controllers.
C. Deploy an additional global catalog server. Configure the existing Hub Transport server to use
the new global catalog server.
D. Deploy a second Hub Transport server. Configure the dynamic distribution groups to use the
new Hub Transport server as their expansion server.
|
View Answer
|
|
|
Users report that they are unable to access their mailboxes on an Exchange Server 2007
computer named Exch1. You verify that connectivity to the server is functioning and that server
hardware is functioning normally. Access to global catalogs is also functioning normally. You
need to report on the status of all required Exchange-specific and Exchange-dependent services.
What should you do?
A. From the Exchange Troubleshooting Assistant, run the Database Troubleshooter.
B. Run the Test-ServiceHealth -Server Exch1 cmdlet.
C. Run the Test-SystemHealth -Server Exch1 cmdlet.
D. Run the Get-ExchangeServer-ldentityExch1 cmdlet.
|
View Answer
|
|
|
Your native Exchange Server 2007 organization has a single Edge Transport server named Exch
Edge1. Exch Edge1 has an Edge Subscription established with a Hub Transport server named
Exch Hub1. The network connection from Exch Edge1 to the Internet is interrupted for an
extended period of time. After the network connection is restored, no messages are being
delivered. You need to restore message flow immediately. What should you do?
A. On ExchHub1, run the Resume-Queue cmdlet.
B. On ExchHub1, run the Retry-Queue cmdlet.
C. On ExchEdge1, run the Resume-Queue cmdlet.
D. On ExchEdge1, run the Retry-Queue cmdlet.
|
View Answer
|
|
|
You need to configure the minimum permissions necessary for a user to be able to configure
mailbox databases on an Exchange Server 2007 computer. What should you do?
A. Delegate Exchange Administrator privileges to the user account at the organization level.
B. Add the user account to the Exchange Server Administrators role.
C. Add the user account to the Exchange Recipient Administrators role.
D. Add the user account to the Exchange Organization Administrators role.
|
View Answer
|
|
|
You need to configure the minimum permissions necessary for a new administrator so that she
can prepare Active Directory for Exchange Server 2007. Which two actions should you perform?
(Each correct answer presents part of the solution. Choose two.)
A. Add the new administrator as an Exchange Full Administrator at the organization level.
B. Add the new administrators user account to the Exchange Enterprise Servers group.
C. Add the new administrators user account to the Domain Admins group.
D. Add the new administrators user account to the Enterprise Admins group.
E. Add the new administrators user account to the Schema Admins group.
|
View Answer
|
|
|
A custom Security Configuration Wizard (SCW) policy is applied to an Exchange Server 2007
Edge Transport server named Exch1. You want to apply this policy to a new Edge Transport
server named Exch2. You install SCW on Exch2. You copy the existing SCW policy to Exch2 as
C:ExchangeSCWPolicy.xml. You need to apply the custom policy to Exch2. What should you
do?
A. First, use SCW to apply the C:ExchangeSCWPolicy.xml policy. Then, run the Scwcmd
register /kbname:”Ex2007KB” /kbfile:“%programfiles%MicrosoftExchange
ServerscriptsExchange2007Edge.xml” command.
B. First, use SCW to apply the C:ExchangeSCWPolicy.xml policy. Then, run the Scwcmd
register /kbname:”Ex2007EdgeKB” /kbfile:”%programfiles%MicrosoftExchange
ServerscriptsExchange2007.xml” command.
C. First, run the Scwcmd register /kbname:” Ex2007KB “ / kbfile:” %programfiles
%MicrosoftExchange ServerscriptsExchange2007 Edge .xml” command. Then, use SCW to
apply the C:ExchangeSCWPolicy.xml policy.
D. First, run the Scwcmd register /kbname:”Ex2007EdgeKB” / kbfile:” %programfiles
%MicrosoftExchange ServerscriptsExchange2007 .xml” command. Then, use SCW to apply
the C:ExchangeSCWPolicy.xml policy.
|
View Answer
|
|
|
You install an Exchange Server 2007 Edge Transport server role and Hub Transport server role.
The server that has the Hub Transport server role is located in an Active Directory site named
Chicago. You need to synchronize your companys Active Directory information to the server that
has the Edge Transport server role. Which two actions should you perform? (Each correct answer
presents part of the solution. Choose two.)
A. Run the New- EdgeSubscription - FileName “c:EdgeserverSubscription.xml “ cmdlet on the
server that has the Edge Transport server role.
B. Run the New-EdgeSubscription -FileName “c:EdgeServerSubscription.xml” ?site “Chicago”
cmdlet on the server that has the Hub Transport server role.
C. Run the ADAMSync command on the server that has the Edge Transport server role.
D. Run the ExportEdgeConfig -CloneConfigData “C:CloneConfigData.xml” command on the
server that has the Edge Transport server role.
E. Run the ImportEdgeConfig - CloneConfigData “ C:CloneConfigData.xml “ command on the
|
View Answer
|
|
|
Your company s Active Directory forest consists of a single site that has a root domain and one
child domain.
You need to prepare Active Directory and the domains prior to installing the first Exchange Server
2007 computer. Which two commands should you run? (Each correct answer presents part of the
solution. Choose two.)
A. Setup /ForestPrep
B. Setup /PrepareAD
C. Setup /DomainPrep
D. Setup /PrepareAllDomains
|
View Answer
|
|
|
You plan to install the Hub Transport server role on an Exchange Server 2007 Mailbox server
named Exch1. The installation must occur during nonbusiness hours. You verify that Exchange
Server 2007 is installed on Exch1 at C:Program FilesMicrosoftExchange Server. A copy of the
Exchange installation files is located in the C:lnstallFiles custom directory. You create a new file
named install.bat in the root directory of drive C. You need to schedule the installation of the Hub
Transport server role on Exch1. What should you do?
A. In the install.bat file, type the following command: “C:lnstallFilesSetup” /mode Install /roles
HubTransport Create a scheduled task to run the executable.
B. In the install.bat file, type the following command: “C:Program FilesMicrosoftExchange
ServerSetup” /mode Install/roles HubTransport Create a scheduled task to run the
executable.
C. In the install.bat file, type the following command: “C:lnstallFilesSetup” /mode RecoverServer
/roles HubTransport Create a scheduled task to run the executable.
D. In the install .bat file, type the following command: “C :Program FilesMicrosoftExchange
ServerSetup” /mode RecoverServer /roles HubTransport Create a scheduled task to run the
executable.
|
View Answer
|
|
|
You are creating a cluster continuous replication (CCR) cluster. You create a failover cluster and
you install the Mailbox server role named ExchMB1 on the active node. You need to install the
Mailbox server role on the passive node. What are two possible ways to achieve this goal? (Each
correct answer presents a complete solution. Choose two.)
A. Run the Enable-StorageGroupCopy -Identity ExchMB1SG1 command.
B. Run the Setup /roles:Mailbox command.
C. Run the Setup /newcms /CMSname:ExchMB1 command.
D. Select the Passive Clustered Mailbox Role check box in the Exchange Server 2007 Setup
|
View Answer
|
|
|
Your companys e-mail domain is contoso.com. Three Edge Transport servers in your Exchange
Server 2007 organization will accept Internet mail. The servers are named Exch1, Exch2, and
Exch3. You need to load balance Exch2 and Exch3 and you need to configure Exch1 as a
backup server. Which three MX records should you specify? (Each correct answer presents part
of the solution. Choose three.)
A. contoso.com MX preference = 10, mail exchanger = Exch1 .contoso.com
B. contoso.com MX preference = 10, mail exchanger = Exch3.contoso.com
C. contoso.com MX preference = 10, mail exchanger = Exch2.contoso.com
D. contoso.com MX preference = 20, mail exchanger = Exch2.contoso.com
E. contoso.com MX preference = 20, mail exchanger = Exch1 .contoso.com
F. contoso.com MX preference = 20, mail exchanger = Exch3.contoso.com
|
View Answer
|
|
|
You are preparing to transition from Exchange 2000 Server to Exchange Server 2007. The
environment consists of a single Windows 2000 native mode Active Directory domain and an
Exchange 2000 organization running in mixed mode. The schema master, domain naming
master, and PDC emulator all run on a Microsoft Windows 2000 Server domain controller. You
need to prepare the environment for Exchange 2007. Which two actions should you perform?
(Each correct answer presents part of the solution. Choose two.)
A. Move the PDC emulator role to a domain controller that runs Windows Server 2003 with
Service Pack 1.
B. Move the schema master role to a domain controller that runs Windows Server 2003 with
Service Pack 1.
C. Move the domain naming master role to a domain controller that runs Windows Server 2003
with Service Pack 1.
D. Convert the Exchange 2000 organization to native mode.
|
View Answer
|
|
|
You need to identify the Exchange Server 2007 server role that must be installed on a stand-
alone server. Which server role should you identity?
A. ClientAccess
B. Edge Transport
C. Hub Transport
D. Mailbox
|
View Answer
|
|
|
You are preparing to install the Mailbox server role on a new Exchange Server 2007 computer.
You need to optimize read and write performance on this server. You also need to provide
redundancy on this server. On which type of array should you place the mailbox database?
A. RAID 1 containing the operating system partition
B. RAID 1 dedicated
C. RAID 0 dedicated
D. RAID 10 dedicated
|
View Answer
|
DETAILS
Question: Your environment contains t he following servers:
Answer: A. Rename Server2 to ExchHub1, and run the Setup /m:RecoverServer command on ExchHub1.
Rating
(0.3) By 8724 users
Added on
Views
Rate it! 
Answer:
Payment of time- barred debt is:
(a) Valid
(b) Void
(c) Illegal
(d) Voidable