|
Related Questions |
View Answer |
|
You need to install the necessary components prior to installing Exchange Server 2007 on a new
server. Which three components should you install? (Each correct answer presents part of the
solution. Choose three.)
A. Windows PowerShell 1.0
B. Network News Transfer Protocol (NNTP)
C. Simple Mail Transfer Protocol (SMTP)
D. Microsoft Management Console (MMC) 3.0
E. Microsoft .NET Framework 1.1
F. Microsoft .NET Framework 2.0
|
View Answer
|
|
|
Your companys Active Directory structure contains a root domain in site A and a single child
domain in site B. You are preparing to install Exchange Server 2007 in the child domain. In the
root domain, you run the Setup /PrepareAD command. You need to ensure that you can install
Exchange in the child domain. What are two possible ways to achieve this goal? (Each correct
answer presents a complete solution. Choose two.)
A. In the child domain, run the Setup /DomainPrep command.
B. In the child domain, run the Setup /PrepareDomain command.
C. In the root domain, run the Setup /ForestPrep command.
D. In the root domain, run the Setup /PrepareDomain command.
E. In the root domain, run the Setup /PrepareAllDomains command.
|
View Answer
|
|
|
You are performing a new installation of Exchange Server 2007. You complete the installation of
a Hub Transport server named ExchHub1 and an Edge Transport server named ExchEdge1.
You need to configure the e-mail routing to meet the following requirements.
Configure ExchHub1 to route Internet e-mail to ExchEdge1.
Configure ExchEdge1 to route e-mail between your Exchange organization and the Internet.
Which two sets of actions should you perform? (Each correct answer presents part of the
solution. Choose two.)
A. On ExchHub1, create a new Send connector named Hub Edge.
Add the * domain as an address space and specify to use DNS to route e-mail automatically.
Add ExchHub1 as a source server.
B. On ExchEdge1, open the Exchange Management Shell.
Export a new Edge Subscription file.
C. On ExchEdge1, create a new Send connector named EdgE. Internet.
Add the * domain as an address space and specify to use DNS to route e-mail automatically.
Add ExchEdge1 as a source server.
D. On ExchHub1, open the Exchange Management Console.
Import the Edge Subscription file.
|
View Answer
|
|
|
Your Exchange Server 2007 organization contains a Client Access server and a Hub Transport
server. The Client Access server fails. You need to add the Client Access server role to the
existing Hub Transport server. What are two possible ways to achieve this goal? (Each correct
answer presents a complete solution. Choose two.)
A. Use the Add or Remove Programs applet in Control Panel.
B. Run the exsetup /mode:recoverserver /roles:ClientAccess command.
C. Run the exsetup /mode:install /roles:ClientAccess command.
D. Run the exsetup /mode:install /roles:ClientAccess, HubTransport command.
E. Use Exchange System Manager, and configure the server as a front-end server.
|
View Answer
|
|
|
You are installing a two-node Single Copy Cluster (SCC) Mailbox server. You name the two
network adapters Private and Public. You need to configure the TCP/IP binding order for the
cluster servers. What should you do?
A. In the Cluster Administrator console, open the properties of the cluster. On the Network
Priority tab, move the Private network to the top.
B. In the Cluster Administrator console, open the properties of the cluster. On the Network
Priority tab, move the Public network to the top.
C. In Control Panel, open Network Connections. On the Advanced menu, click Advanced
Settings. On the Adapters and Bindings tab, move the Private connection to the top.
D. In Control Panel, open Network Connections. On the Advanced menu, click Advanced
Settings. On the Adapters and Bindings tab, move the Public connection to the top.
|
View Answer
|
|
|
Question: 43
You need to generate a report on all of the Exchange Server 2007 computer s in your Exchange
organization. The report must include:
Operating system version
Number of processors
Total physical memory
Number of storage groups
Number of mailbox databases
What should you do?
A. Run the Get-ExchangeServer | Format-List cmdlet.
B. Run the Get-OrganizationConfig cmdlet.
C. Run the Test-SystemHealth cmdlet.
D. Run the Health Check scan in the Exchange Best Practices Analyzer.
|
View Answer
|
|
|
Question: 41
Some of your companys mobile sales representatives use portable computers that run Microsoft
Office Outlook 2007 and are configured to connect to your Exchange Server 2007 organization by
using Outlook Anywhere. You need to monitor your environment to verify that these mobile users
are able to connect to the Exchange organization, and that performance meets or exceeds the
company standard. Which two cmdlets should you run? (Each correct answer presents part of the
solution. Choose two.)
A. Test- MAPIConnectivity
B. Test- OutlookWebServices
C. Test- WebServicesConnectivity
D. Test- ServiceHealth
E. Get- MailboxStatistics
|
View Answer
|
|
|
After a brief network outage, your monitoring system alerts you that a significant number of SMTP
queues on your Hub Transport server are in a retry status. You need to force the Hub Transport
server to send the queued e-mail immediately. Which cmdlet should you run?
A. Retry-queuE.filter {status - eq “retry”)
B. Retry-queuE.filter (status - eq “suspended”)
C. Resume-queuE.filter (status - eq “retry”)
D. Resume-queuE.filter (status - eq “suspended”)
|
View Answer
|
|
|
Question: 38
You need to find out the total size of a users mailbox. What should you do?
A. Run the Database Troubleshooter in the Exchange Troubleshooting Assistant.
B. Run the Get-MailboxDatabase cmdlet.
.C. Run the Get-MailboxStatistics cmdlet
D. Run the Get-Mailbox cmdlet.
|
View Answer
|
|
|
Question: 37
You want to gather information about user connectivity on an Exchange Server 2007 Mailbox
server named Exch1. You need to generate a report of all Exch1 mailboxes that displays the
latest user logon time. What should you do?
A. In Performance Monitor, add the Active Client Logons counter with _Total instances from the
MSExchangelS Mailbox object.
B. Run the Get-Mailbox -Server Exch1 cmdlet.
C. Run the Get-MailboxStatistics -Server Exch1 cmdlet.
D. Run the Get-LogonStatistics -Server Exch1 cmdlet.
|
View Answer
|
|
|
Question: 32
Your Exchange Server 2007 environment is configured with cluster continuous replication (CCR).
The Microsoft Windows Cluster service (MSCS) is installed on two servers named Server1 and
Server2. The default cluster that runs on the MSCS cluster is named Clus1. The cluster mailbox
server (CMS) is named ExchCMS1. Currently Clus1 and ExchCMS1 are running on the Server1
cluster node, and the CCR replica is running on the Server2 cluster node. You need to back up
the CCR replica. In the backup application, which name should you specify?
A. Server1
B. Server2
C. ExchCMS1
D. Clus1
|
View Answer
|
|
|
An Exchange Server 2007 computer name d Exch1 fails. You build a new Microsoft Windows
Server 2003 computer named Exch1 to replace the failed computer. Before you restore the
mailbox databases from backup, you need to restore the Exchange Mailbox server role on Exch1.
What should you do?
A. Restore the System State data and the Microsoft Information Store data.
B. Run the Setup /NewProvisionedServer/role:Mailbox command.
C. Run the Setup /m:lnstall /role: Mailbox command.
D. Run the Setup /m:RecoverServer command.
|
View Answer
|
|
|
Your Exchange Server 2007 environment is configured with cluster continuous replication (CCR).
The name of the clustered mailbox server is ExchCMS1.
You need to minimize downtime and you need to ensure that no data loss occurs during a failover
operation.
Which cmdlet should you run?
A. Set- MailboxServer ExchCMS1 - AutoDatabaseMountDial:BestAvailability
B. Set- MailboxServer ExchCMS1 - AutoDatabaseMountDial:Lossless
C. Set- MailboxServer ExchCMS1 – ForceDatabaseMountAfter:Unlimited
D. Set- MailboxDatabasE.Identity “Mailbox Database” - RetainDeletedltemsUntilBackup $true
|
View Answer
|
|
|
An Exchange Server 2007 computer named Exch2 runs all features of the Client Access server
role. Exch2 fails. You install a new Microsoft Windows server named Exch5 and restore the
System State data. You need to finish restoring the services as they were previously configured.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)
A. Restore the ClientAccess directory.
B. Restore the in directory.
C. Enable Exchange ActiveSync integration for the Microsoft Office Outlook Web Access site.
D. Reinstall the Client Access server role by running the Setup /role:ClientAccess command.
E. Reinstall the Client Access server role by running the Setup /mode:RecoverServer command.
|
View Answer
|
|
|
Your company uses the Volume Shadow Copy Service (VSS) to perform full backups of the
Exchange Server 2007 mailbox databases every night.
There is a backup window between 20:00 and 24:00 each week night and a backup window
between 19:00 and 24:00 on Saturdays and Sundays
The full backups currently take five hours to complete.
Management requests that you modify the backup configuration to meet the following
requirements.
At least one full backup must be performed per week.
Logs must be truncated more often than once per week.
Backups must be performed within the current backup windows
Database restores must require no more than two backup files.
You need to configure the backups for the mailbox databases to meet the requirements.
What should you do?
A. Configure differential backups on week nights and full backups on Saturdays and Sundays.
B. Configure incremental backups on week nights and full backups on Saturdays and Sundays.
C. Configure daily full backups, and throttle the database checksum.
D. Configure daily copy backups, and throttle the database checksum.
|
View Answer
|
|
|
Your companys Active Directory environment becomes corrupted on the morning of Thursday,
March 17. The Active Directory team restores all of the directory objects and settings from a
backup that was taken on Monday, March 14. Users who were assigned mailboxes between
Monday, March 14 and Thursday, March 17, now report that they cannot access their mailboxes.
You need to restore mailbox access for these users. What should you do?
A. Run the Enable-Mailbox cmdlet from the Exchange server.
B. Run the Connect-Mailbox cmdlet from the Exchange server.
C. Restore the latest mailbox database backup.
D. Restore the latest System State backup.
|
View Answer
|
|
|
Your company maintains a hot standby server named ExchDR1.
An Exchange Server 2007 computer named Exch1 fails. You perform the following actions.
1. On Exch1, take the Exch1.edb database offline.
2. On ExchDR1, create a new storage group named ExchDR and a database named
ExchDR1.edb.
3. Copy the Exch1.edb database from Exch1 to ExchDR1.
4. On ExchDR1, rename the copied database from Exch1.edb to ExchDR1.edb.
Your attempt to mount the database is unsuccessful
You need to ensure that the copied database mounts on the new server.
What should you do?
A. Rename ExchDR1 to Exch1.
B. Rename the database on ExchDR1 to Exch1 .edb.
C. Set the This database can be overwritten by restore attribute on the database properties.
D. Run the Move-Mailbox -ConfigurationOnly -TargetDatabase ExchDR1.edb cmdlet.
|
View Answer
|
|
|
Your Exchange Server 2007 Edge Transport server role fails. You install a new Microsoft
Windows Server 2003 computer and reinstall the Edge Transport server role on this new server.
You find out that the address rewrites that were previously configured on the Edge Transport
server role no longer function. You need to recover the address rewrite capability. What should
you do?
A. Run the Setup /m:RecoverServer command.
B. Run the ImportEdgeConfig.ps1 script.
C. Import the Edge Subscription file on the Hub Transport server.
D. Copy the Edge Subscription file to the Hub Transport server.
|
View Answer
|
|
|
In your Exchange Server 2007 environment, a users mailbox was purged from the mailbox
server, and a backup of the mailbox database was restored to a recovery storage group. You
need to recover the purged mailbox to a production database. What should you do?
A. Run the Connect-Mailbox cmdlet from the Exchange server.
B. Run the Restore-Mailbox cmdlet from the Exchange server.
C. Run the Enable-Mailbox cmdlet from the Exchange server.
D. Run the Exmerge utility from the Exchange server.
|
View Answer
|
|
|
An inappropriate message that has the subject line of Exchange is sent to all users on the
Exchange Server 2007 Mailbox server named Exch1. You need to delete this message from all
mailboxes. What should you do?
A. On Exch1, find the message ID of the original message and then run the Remove-Message –
Identity <IDnumber> cmdlet.
B. On Exch1, find the message ID of the original message and then run the Export-Message –
Identity <IDnumber> c: emp cmdlet. Delete all of the messages in the directory.
C. Create a new mailbox named TempMailbox that has a folder named Export. Run the Get-
Mailbox -Server Exch1 | Export-Mailbox -TargetMailbox TempMailbox -TargetFolder Export –
SubjectKeywords “Exchange” -DeleteContent cmdlet.
D. From the Exchange Management Console, create a new transport rule named Exchange
delete. Set the condition to “when the Subject field contains Exchange”. Set the action to
“silently drop the message”.
|
View Answer
|
DETAILS
Question: You are preparing to install the Mailbox server role on a new Exchange Server 2007 computer.
Answer: D. RAID 10 dedicated
Rating
(0.3) By 7564 users
Added on
Views
Rate it! 
Answer:
Payment of time- barred debt is:
(a) Valid
(b) Void
(c) Illegal
(d) Voidable