|
Related Questions |
View Answer |
|
Your Exchange Server 2007 organization contains a Client Access server and a Hub Transport
server. The Client Access server fails. You need to add the Client Access server role to the
existing Hub Transport server. What are two possible ways to achieve this goal? (Each correct
answer presents a complete solution. Choose two.)
A. Use the Add or Remove Programs applet in Control Panel.
B. Run the exsetup /mode:recoverserver /roles:ClientAccess command.
C. Run the exsetup /mode:install /roles:ClientAccess command.
D. Run the exsetup /mode:install /roles:ClientAccess, HubTransport command.
E. Use Exchange System Manager, and configure the server as a front-end server.
|
View Answer
|
|
|
You are installing a two-node Single Copy Cluster (SCC) Mailbox server. You name the two
network adapters Private and Public. You need to configure the TCP/IP binding order for the
cluster servers. What should you do?
A. In the Cluster Administrator console, open the properties of the cluster. On the Network
Priority tab, move the Private network to the top.
B. In the Cluster Administrator console, open the properties of the cluster. On the Network
Priority tab, move the Public network to the top.
C. In Control Panel, open Network Connections. On the Advanced menu, click Advanced
Settings. On the Adapters and Bindings tab, move the Private connection to the top.
D. In Control Panel, open Network Connections. On the Advanced menu, click Advanced
Settings. On the Adapters and Bindings tab, move the Public connection to the top.
|
View Answer
|
|
|
You need to generate a report on all of the Exchange Server 2007 computer s in your Exchange
organization. The report must include:
Operating system version
Number of processors
Total physical memory
Number of storage groups
Number of mailbox databases
What should you do?
A. Run the Get-ExchangeServer | Format-List cmdlet.
B. Run the Get-OrganizationConfig cmdlet.
C. Run the Test-SystemHealth cmdlet.
D. Run the Health Check scan in the Exchange Best Practices Analyzer.
|
View Answer
|
|
|
Your Exchange Server 2007 organization has three Exchange servers, as shown in the following
table.
A user in your Exchange organization sends a message to a recipient outside of your company.
The recipients address is [email protected], and Latest Sales Figures is the subject of the
message. Your user reports that the message has not been delivered.
You need to find out whether the message has left your Exchange organization.
Which cmdlet should you run on the Hub Transport server?
A. Get-Recipient-Filter { PrimarySmtpAddress - eq “[email protected]”}
B. Get-MessagE.Filter { Subject - eq “Latest Sales Figures”}
C. Get-QueuE.Filter { NextHopDomain - eq “contoso.com”}
D. Get-queuE. Filter {status - eq “retry”}
|
View Answer
|
|
|
Some of your companys mobile sales representatives use portable computers that run Microsoft
Office Outlook 2007 and are configured to connect to your Exchange Server 2007 organization by
using Outlook Anywhere. You need to monitor your environment to verify that these mobile users
are able to connect to the Exchange organization, and that performance meets or exceeds the
company standard. Which two cmdlets should you run? (Each correct answer presents part of the
solution. Choose two.)
A. Test- MAPIConnectivity
B. Test- OutlookWebServices
C. Test- WebServicesConnectivity
D. Test- ServiceHealth
E. Get- MailboxStatistics
|
View Answer
|
|
|
After a brief network outage, your monitoring system alerts you that a significant number of SMTP
queues on your Hub Transport server are in a retry status. You need to force the Hub Transport
server to send the queued e-mail immediately. Which cmdlet should you run?
A. Retry-queuE.filter {status - eq “retry”)
B. Retry-queuE.filter (status - eq “suspended”)
C. Resume-queuE.filter (status - eq “retry”)
D. Resume-queuE.filter (status - eq “suspended”)
|
View Answer
|
|
|
The Hub Transport server role resides on an Exchange Server 2007 computer named Exch
Hub1. Message tracking is enabled. Written company privacy policy states that the subject line of
e-mail messages should not be stored in the tracking log. You need to track e-mail messages
from ExchHub1 while complying with company policy. Which cmdlet should you run?
A. Set- TransportServer Exch Hub1 - MessageTrackingLogEnabled : $false
B. Set- TransportServer Exch Hub1 C MessageTrackingLogSubjectLoggingEnabled : $false
C. Set- ReceiveConnector - ProtocolLoggingLevel None
D. Get- MessageTrackingLog -Subject None
|
View Answer
|
|
|
You need to find out the total size of a users mailbox. What should you do?
A. Run the Database Troubleshooter in the Exchange Troubleshooting Assistant.
B. Run the Get-MailboxDatabase cmdlet.
C. Run the Get-MailboxStatistics cmdlet.
D. Run the Get-Mailbox cmdlet.
|
View Answer
|
|
|
You want to gather information about user connectivity on an Exchange Server 2007 Mailbox
server named Exch1. You need to generate a report of all Exch1 mailboxes that displays the
latest user logon time. What should you do?
A. In Performance Monitor, add the Active Client Logons counter with _Total instances from the
MSExchangelS Mailbox object.
B. Run the Get-Mailbox -Server Exch1 cmdlet.
C. Run the Get-MailboxStatistics -Server Exch1 cmdlet.
D. Run the Get-LogonStatistics -Server Exch1 cmdlet.
|
View Answer
|
|
|
Your Exchange Server 2007 organization contains two Exchange servers. The roles on the two
servers are configured as shown in the following table.
Two users named Marc and Maria have mailboxes on ExchMb1. Marc’s computer is on segment
A. Maria’s computer is on segment B. The Exchange servers are on segment C
Marc sends a message to Maria. The message leaves Marcs Outbox and is listed in his Sent
Items folder. However, the message is never delivered to Man as mailbox.
You need to find out the most likely cause of the problem.
What should you do?
A. On ExchMb1, run the Test-ServiceHealth cmdlet.
B. On ExchHub1, run the Test-ServiceHealth cmdlet.
C. On ExchMb1, run the Test-MAPIConnectivity -Server ExchMb1 cmdlet.
D. On a computer on segment A, run the Test-MAPIConnectivity -Server ExchMb1 cmdlet.
|
View Answer
|
|
|
Your native Exchange Server 2007 organization contains 10 Exchange servers. The roles on
these servers are configured as shown in the following table.
You need to generate a single report that indicates the number of disconnected mailboxes in your
environment and how much storage space these mailboxes consume. You need to export the
report to a file.
What should you do?
A. Run the Get-MailboxServer | Get-MailboxStatistics | Where {$_.DisconnectDatE.ne $null} |
Export-Csv -Path c: mpdisconnect.csv cmdlet.
B. Run the Get-Mailbox | Get-MailboxStatistics | Where {$_.DisconnectDatE.ne $null} | Export-
Csv -Path c: mpdisconnect.csv cmdlet.
C. Run the Get-Recipient -RecipientType MailboxUser | Export-Csv -Path c: mpdisconnect.csv
cmdlet. Then, open disconnect.csv and remove all entries for active mailboxes.
D. In the Exchange Management Console, expand the Recipient Configuration work center and
select the Disconnected Mailbox node.
|
View Answer
|
|
|
You install a new Exchange Server 2007 computer with the Edge Transport server role. You need
to create a backup of the Edge Transport server role. What should you do?
A. In the Microsoft Windows Backup utility, select Microsoft Exchange Server.
B. In the Microsoft Windows Backup utility, select the file system location TransportRolesdata*.
C. Run the ExportEdgeConfig.ps1 script with thE.CloneConfigData parameter.
D. Run the ExportEdgeConfig.ps1 script with thE.CloneConfigAnswer parameter.
|
View Answer
|
|
|
Your Exchange Server 2007 environment is configured with cluster continuous replication (CCR).
The Microsoft Windows Cluster service (MSCS) is installed on two servers named Server1 and
Server2. The default cluster that runs on the MSCS cluster is named Clus1. The cluster mailbox
server (CMS) is named ExchCMS1. Currently Clus1 and ExchCMS1 are running on the Server1
cluster node, and the CCR replica is running on the Server2 cluster node. You need to back up
the CCR replica. In the backup application, which name should you specify?
A. Server1
B. Server2
C. ExchCMS1
D. Clus1
|
View Answer
|
|
|
An Exchange Server 2007 computer name d Exch1 fails. You build a new Microsoft Windows
Server 2003 computer named Exch1 to replace the failed computer. Before you restore the
mailbox databases from backup, you need to restore the Exchange Mailbox server role on Exch1.
What should you do?
A. Restore the System State data and the Microsoft Information Store data.
B. Run the Setup /NewProvisionedServer/role:Mailbox command.
C. Run the Setup /m:lnstall /role: Mailbox command.
D. Run the Setup /m:RecoverServer command.
|
View Answer
|
|
|
Your Exchange Server 2007 environment is configured with cluster continuous replication (CCR).
The name of the clustered mailbox server is ExchCMS1.
You need to minimize downtime and you need to ensure that no data loss occurs during a failover
operation.
Which cmdlet should you run?
A. Set- MailboxServer ExchCMS1 - AutoDatabaseMountDial:BestAvailability
B. Set- MailboxServer ExchCMS1 - AutoDatabaseMountDial:Lossless
C. Set- MailboxServer ExchCMS1 – ForceDatabaseMountAfter:Unlimited
D. Set- MailboxDatabasE.Identity “Mailbox Database” - RetainDeletedltemsUntilBackup $true
|
View Answer
|
|
|
An Exchange Server 2007 computer named Exch2 runs all features of the Client Access server
role. Exch2 fails. You install a new Microsoft Windows server named Exch5 and restore the
System State data. You need to finish restoring the services as they were previously configured.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)
A. Restore the ClientAccess directory.
B. Restore the in directory.
C. Enable Exchange ActiveSync integration for the Microsoft Office Outlook Web Access site.
D. Reinstall the Client Access server role by running the Setup /role:ClientAccess command.
E. Reinstall the Client Access server role by running the Setup /mode:RecoverServer command.
|
View Answer
|
|
|
Your company uses the Volume Shadow Copy Service (VSS) to perform full backups of the
Exchange Server 2007 mailbox databases every night.
There is a backup window between 20:00 and 24:00 each week night and a backup window
between 19:00 and 24:00 on Saturdays and Sundays
The full backups currently take five hours to complete.
Management requests that you modify the backup configuration to meet the following
requirements.
At least one full backup must be performed per week.
Logs must be truncated more often than once per week.
Backups must be performed within the current backup windows
Database restores must require no more than two backup files.
You need to configure the backups for the mailbox databases to meet the requirements.
What should you do?
A. Configure differential backups on week nights and full backups on Saturdays and Sundays.
B. Configure incremental backups on week nights and full backups on Saturdays and Sundays.
C. Configure daily full backups, and throttle the database checksum.
D. Configure daily copy backups, and throttle the database checksum.
|
View Answer
|
|
|
Your companys Active Directory environment becomes corrupted on the morning of Thursday,
March 17. The Active Directory team restores all of the directory objects and settings from a
backup that was taken on Monday, March 14. Users who were assigned mailboxes between
Monday, March 14 and Thursday, March 17, now report that they cannot access their mailboxes.
You need to restore mailbox access for these users. What should you do?
A. Run the Enable-Mailbox cmdlet from the Exchange server.
B. Run the Connect-Mailbox cmdlet from the Exchange server.
C. Restore the latest mailbox database backup.
D. Restore the latest System State backup.
|
View Answer
|
|
|
Your company maintains a hot standby server named ExchDR1.
An Exchange Server 2007 computer named Exch1 fails. You perform the following actions.
1. On Exch1, take the Exch1.edb database offline.
2. On ExchDR1, create a new storage group named ExchDR and a database named
ExchDR1.edb.
3. Copy the Exch1.edb database from Exch1 to ExchDR1.
4. On ExchDR1, rename the copied database from Exch1.edb to ExchDR1.edb.
Your attempt to mount the database is unsuccessful
You need to ensure that the copied database mounts on the new server.
What should you do?
A. Rename ExchDR1 to Exch1.
B. Rename the database on ExchDR1 to Exch1 .edb.
C. Set the This database can be overwritten by restore attribute on the database properties.
D. Run the Move-Mailbox -ConfigurationOnly -TargetDatabase ExchDR1.edb cmdlet.
|
View Answer
|
|
|
Your Exchange Server 2007 Edge Transport server role fails. You install a new Microsoft
Windows Server 2003 computer and reinstall the Edge Transport server role on this new server.
You find out that the address rewrites that were previously configured on the Edge Transport
server role no longer function. You need to recover the address rewrite capability. What should
you do?
A. Run the Setup /m:RecoverServer command.
B. Run the ImportEdgeConfig.ps1 script.
C. Import the Edge Subscription file on the Hub Transport server.
D. Copy the Edge Subscription file to the Hub Transport server.
|
View Answer
|
DETAILS
Question: Your company has four Active Directory sites. A Hub Transport server role and a Mailbox server
Answer: D. Set- AdSitE. Identity Dallas - HubSiteEnabled $true
Rating
(0.3) By 8333 users
Added on
Views
Rate it! 
Answer:
Payment of time- barred debt is:
(a) Valid
(b) Void
(c) Illegal
(d) Voidable