Question:
How intervlan communication takes place in a layer 3 switch. Also the configuration details.
Answer:
In Vlans every Vlan is assigned a Vlan Id and vlan to communicate require a Router between them as every Vlan is in different network .They can also have a Trunk configured so that there traffic can flow between them. Source: CoolInterview.com
Answered by: Ravindra Gotavade | Date: 10/10/2008
| Contact Ravindra Gotavade
Simply,
Assign IP to two different VLAN which needs routing via L3. Then enter static route in router for this Source: CoolInterview.com
Answered by: Harsha bardhan | Date: 1/30/2009
| Contact Harsha bardhan
inter-vlan done to communicate to different vlan id which is configure in same network. its is configure on layer 3 devices. its use isl protocol Source: CoolInterview.com
Answered by: mahesh bhamode | Date: 4/4/2009
| Contact mahesh bhamode
L3 Switch works as a router if IP routing is enable on switch. to make the InterVlan communication, give the IP adress to every VLAN & enable the IP Routing. Source: CoolInterview.com
Answered by: saraswat | Date: 10/3/2009
| Contact saraswat
If you have the better answer, then send it to us. We will display your answer after the approval.
Rules to Post Answers in CoolInterview.com:-
- There should not be any Spelling Mistakes.
- There should not be any Gramatical Errors.
- Answers must not contain any bad words.
- Answers should not be the repeat of same answer, already approved.
- Answer should be complete in itself.
|