INTERVIEW QUESTIONS COMPUTER HARDWARE A+ AND BASIC PC DETAILS

Question: How do you clear CMOS password?

Answer: Since CMOS is a special chip with its own battery, the best way to clear out a CMOS chip is to disconnect it from its power supply.

Since CMOS is a special chip with its own battery, the best way to clear out a CMOS chip is to disconnect it from its power supply. Source: CoolInterview.com

remove the CMOS battery for 5 minutes Source: CoolInterview.com

remove u r cmos jumper is near by cmos battery.
remove cmos battery and ram to remove software.

Source: CoolInterview.com

To remove CMOS battery and insert again. Source: CoolInterview.com

Another method to remove CMOS password is by changing jumper form pin 1 , 2 to 2 , 3 and then switch on computer for 20 sec and again change jumper setting to default 1, 2. Source: CoolInterview.com

Just remove the cmos battery.and wait some seconds. re fit the battery again. Source: CoolInterview.com

removing the cmos battery and jumper. Source: CoolInterview.com

Remove the CMOS battery for 5 minutes. Source: CoolInterview.com

Since CMOS is a special chip with its own battery, the best way to clear out a CMOS chip is to disconnect it from its power supply.

Source: CoolInterview.com

first remove the CMOS battery from from board and after 5sec put it again. Source: CoolInterview.com

IN MOTHERBOARD NEAR COM CHIP THERE IS A JUMPER, REMOVE THE JUMPUR AND RESTART UR PC & DO ANY THING ON IT 3 TO 5 MIN, AFTER THAT SHUT DOWN UR PC & PLACE JUMPER ACROSS TO PIN ,AND START UR PC. Source: CoolInterview.com

remove the cmos battery and near jumper short & jumper is 3 pin jemper is remove and one time different side and computer on and afer computer of and jumper is same side Source: CoolInterview.com

Remove CMOS battery,start the pc & Enter into cmos setup & clear the passward Source: CoolInterview.com

Remove the cmos battery for 1 minutes than after install. Source: CoolInterview.com

just 2 minit removing CMOS battery Source: CoolInterview.com

remove cmos battary and jumper Source: CoolInterview.com

thre are exactly 3 things
CMOS is a special chip with its own battery, the best way to clear out a CMOS chip is to disconnect it from its power supply.
remove cmos jumper
remove the jumper Source: CoolInterview.com

We can remove the password by using the ghost cd.The following steps must be followed
Ghost cd(version 9.5)->restart->start boot cd->next->dos->dos->type m(for menu)->Bios& cmos tool->kill cmos(press enter 2 times)->exit-> restart Source: CoolInterview.com

another way 2 remove cmos password is every pc has its default bios password.just write down at where we are asked 4 password.
1 more way is o to command promt n write DEBUG this will ask u some code like 70 71 . now ur password is removed. Source: CoolInterview.com

remove cmos battary and insert again Source: CoolInterview.com

we remove the battery or jumper and clean cmos or we can go in the safe mode and can change the password . Source: CoolInterview.com

Disconnect the CMOS battery by removing that for 5minutes then again insert it Source: CoolInterview.com

once remove the cmos battery from the motherboard and run the system with out cmos battery after some times again connect the cmos battery automatic remove the cmos password. Source: CoolInterview.com

once remove the cmos battery from the motherboard and run the system after some times again connect the cmos battery must be clear the cmos password. Source: CoolInterview.com

TO Remove the cmos battery and some second again insert the cmos battery Source: CoolInterview.com

simply change the jumper from 1-2 to 2-3 pins, after put it before it is.(2-3 pin to 1-2 pin.)

or

simply remove cmos battery and reinsert agian. Source: CoolInterview.com

Just remove the CMOS battery one second and polarity reversed then reinstall the battery. Then the CMOS password will be automatically remove. Source: CoolInterview.com

Just remove the cmos battery.and wait some seconds. re fit the battery again.


Source: CoolInterview.com

1. First way you remove CMOS battery from motherboard for5- 10 minutes for a better output
2.Remove jumper near of CMOS if 1.2 then do it 2.3 Source: CoolInterview.com

If you have the better answer, then send it to us. We will display your answer after the approval.

Rules to Post Answers in CoolInterview.com:-

• There should not be any Spelling Mistakes.
• There should not be any Gramatical Errors.
• Answers must not contain any bad words.
• Answers should not be the repeat of same answer, already approved.
• Answer should be complete in itself.

Name :*
Email Id :*
Answer :*
Verification Code	Not readable? Load New Code
Enter the above shown code: *
	Inform me about updated answers to this question